Skip to content

centos固定多网卡启动顺序

系统插上PCI网卡每次重启后顺序可能都会不同,影响nagios检控准确度.

CentOS6

在CentOS6中，具体网卡的配置文件在/etc/udev/rules.d/70-persistent-net.rules cat /etc/udev/rules.d/70-persistent-net.rules

# PCI device 0x14e4:0x163b (bnx2) (custom name provided by external tool) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”78:2b:cb:xx:xx:02″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth1″ # PCI device 0x14e4:0x163b (bnx2) (custom name provided by external tool) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”78:2b:cb:xx:xx:03″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth2″ # USB device 0x9710:0x7830 (usb) (custom name provided by external tool) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”00:60:6e:xx:xx:f6″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth0″ # PCI device 0x14e4:0x165a (tg3) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”00:10:18:xx:xx:51″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth3″ # PCI device 0x8086:0x10c9 (igb) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”00:1b:21:xx:xx:a1″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth4″ # PCI device 0x8086:0x10c9 (igb) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”00:1b:21:xx:xx:a0″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth5″

删除(usb),(tg3)并调整bnx2及igb的名称,调整后如下

# PCI device 0x14e4:0x163b (bnx2) (custom name provided by external tool) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”78:2b:cb:xx:xx:02″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth0″ # PCI device 0x14e4:0x163b (bnx2) (custom name provided by external tool) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”78:2b:cb:xx:xx:03″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth1″ # PCI device 0x8086:0x10c9 (igb) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”00:1b:21:xx:xx:a1″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth2″ # PCI device 0x8086:0x10c9 (igb) SUBSYSTEM==”net”, ACTION==”add”, DRIVERS==”?*”, ATTR{address}==”00:1b:21:xx:xx:a0″, ATTR{type}==”1″, KERNEL==”eth*”, NAME=”eth3″

配置网卡文件 同时修改/etc/sysconfig/network-scripts/ifcfg-eth*网卡配置文件,修改设备名和MAC地址和udev对应. 同时注意ip地址和网关.

重启服务器 reboot

centos5.8

dmesg中看到intel的pci网卡先于内置网卡

e1000e: Intel(R) PRO/1000 Network Driver – 1.4.4-k e1000e: Copyright(c) 1999 – 2011 Intel Corporation. e1000e 0000:03:00.0: Disabling ASPM L1 GSI 25 sharing vector 0x52 and IRQ 25 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 38 (level, low) -> IRQ 82 PCI: Setting latency timer of device 0000:03:00.0 to 64 EDAC MC: Ver: 2.0.1 Feb 21 2012 e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:2d:52:c4 e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:03:00.0: eth0: MAC: 0, PHY: 4, PBA No: D28207-005 e1000e 0000:03:00.1: Disabling ASPM L1 GSI 26 sharing vector 0x62 and IRQ 26 ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 45 (level, low) -> IRQ 98 PCI: Setting latency timer of device 0000:03:00.1 to 64 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 scsi 3:0:0:0: Attached scsi generic sg2 type 5 e1000e 0000:03:00.1: eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:2d:52:c5 e1000e 0000:03:00.1: eth1: Intel(R) PRO/1000 Network Connection e1000e 0000:03:00.1: eth1: MAC: 0, PHY: 4, PBA No: D28207-005 bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) GSI 27 sharing vector 0x72 and IRQ 27 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 36 (level, low) -> IRQ 114 PCI: Setting latency timer of device 0000:01:00.0 to 64 eth2: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 114, node addr 0024e86cd577 GSI 28 sharing vector 0x7A and IRQ 28 ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 48 (level, low) -> IRQ 122 PCI: Setting latency timer of device 0000:01:00.1 to 64 eth3: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 122, node addr 0024e86cd578 sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray

cat /etc/udev/rules.d/60-net.rules

ACTION==”add”, SUBSYSTEM==”net”, IMPORT{program}=”/lib/udev/rename_device” SUBSYSTEM==”net”, RUN+=”/etc/sysconfig/network-scripts/net.hotplug”

查看driver和bus-info ethtool -i eth0 driver: bnx2 version: 2.1.11 firmware-version: bc 4.6.4 NCSI 1.0.6 bus-info: 0000:01:00.0 ethtool -i eth1 driver: bnx2 version: 2.1.11 firmware-version: bc 4.6.4 NCSI 1.0.6 bus-info: 0000:01:00.1 ethtool -i eth2 driver: e1000e version: 1.4.4-k firmware-version: 5.11-2 bus-info: 0000:03:00.0 ethtool -i eth3 driver: e1000e version: 1.4.4-k firmware-version: 5.11-2 bus-info: 0000:03:00.1

编辑顺序 DRIVER指driver: e1000e ID是指bus-info:PCI ID

vi /etc/udev/rules.d/60-net.rules

DRIVER==”bnx2″,ID==”0000:01:00.0″,NAME=”eth0″ DRIVER==”bnx2″,ID==”0000:01:00.1″,NAME=”eth1″ DRIVER==”e1000e”,ID==”0000:03:00.0″,NAME=”eth2″ DRIVER==”e1000e”,ID==”0000:03:00.1″,NAME=”eth3″

重启 reboot

input: PC Speaker as /class/input/input0 bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) GSI 25 sharing vector 0x52 and IRQ 25 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 36 (level, low) -> IRQ 82 PCI: Setting latency timer of device 0000:01:00.0 to 64 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 82, node addr 0024e86cd577 GSI 26 sharing vector 0x5A and IRQ 26 ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 48 (level, low) -> IRQ 90 PCI: Setting latency timer of device 0000:01:00.1 to 64 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 90, node addr 0024e86cd578 EDAC MC: Ver: 2.0.1 Feb 21 2012 e1000e: Intel(R) PRO/1000 Network Driver – 1.4.4-k e1000e: Copyright(c) 1999 – 2011 Intel Corporation. e1000e 0000:03:00.0: Disabling ASPM L1 GSI 27 sharing vector 0x62 and IRQ 27 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 38 (level, low) -> IRQ 98 PCI: Setting latency timer of device 0000:03:00.0 to 64 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 scsi 3:0:0:0: Attached scsi generic sg2 type 5 e1000e 0000:03:00.0: eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:2d:52:c4 e1000e 0000:03:00.0: eth2: Intel(R) PRO/1000 Network Connection e1000e 0000:03:00.0: eth2: MAC: 0, PHY: 4, PBA No: D28207-005 e1000e 0000:03:00.1: Disabling ASPM L1 GSI 28 sharing vector 0x72 and IRQ 28 ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 45 (level, low) -> IRQ 114 PCI: Setting latency timer of device 0000:03:00.1 to 64 e1000e 0000:03:00.1: eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:2d:52:c5 e1000e 0000:03:00.1: eth3: Intel(R) PRO/1000 Network Connection e1000e 0000:03:00.1: eth3: MAC: 0, PHY: 4, PBA No: D28207-005 sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray

nagios的check_traffic.sh脚本查看顺序 ./check_traffic.sh -V 2c -C privatepass -H localhost -L

List Interface for host localhost. Interface index 1 orresponding to lo Interface index 2 orresponding to eth0 Interface index 3 orresponding to eth1 Interface index 4 orresponding to eth2 Interface index 5 orresponding to eth3

Posted in linux 维护优化.

Tagged with , .

rev="post-1703" No comments

By C1G – 2014/09/24

No Responses (yet)

Stay in touch with the conversation, subscribe to the RSS feed for comments on this post.



Some HTML is OK

or, reply to this post via trackback.

« »