linux基本安全配置设置脚本1.2发布

依据linux基本安全配置手册
方便设置一些基本的linux安全设置

更新=============
兼容centos/rhel 6 tty,ctrlaltdel,ipv6
关闭服务可以使用白名单,更可靠
限制su的用户组修正兼容性(充许su的用户需用gpasswd命令添加,sudoer不受限制)

#vi autosafe.sh

#!/bin/bash
#########################################################################
#
# File: autosafe.sh
# Description:
# Language: GNU Bourne-Again SHell
# Version: 1.2
# Date: 2012-3-30
# Corp.: c1gstudio
# Author: c1g
# WWW: http://blog.c1gstudio.com
### END INIT INFO
###############################################################################

if [[ ! -n ${WORKUSER} ]]; then
WORKUSER=c1g
fi
if [[ ! -n ${SSHPORT} ]]; then
SSHPORT=22
fi
V_DELUSER=”adm lp sync shutdown halt mail news uucp operator games gopher ftp”
V_DELGROUP=”adm lp mail news uucp games gopher mailnull floppy dip pppusers popusers slipusers daemon”
V_PASSMINLEN=8
V_HISTSIZE=30
V_TMOUT=300
V_GROUPNAME=suadmin
#V_SERVICE Not working since Version 1.2
V_SERVICE=”acpid anacron apmd atd auditd autofs avahi-daemon avahi-dnsconfd bluetooth cpuspeed cups dhcpd firstboot gpm haldaemon hidd ip6tables ipsec isdn kudzu lpd mcstrans messagebus microcode_ctl netfs nfs nfslock nscd pcscd portmap readahead_early restorecond rpcgssd rpcidmapd rstatd sendmail setroubleshoot snmpd xfs xinetd yppasswdd ypserv yum-updatesd tog-pegasus”
V_TTY=”3|4|5|6″
V_TTY6=”1-2″
V_SUID=(
‘/usr/bin/chage’
‘/usr/bin/gpasswd’
‘/usr/bin/wall’
‘/usr/bin/chfn’
‘/usr/bin/chsh’
‘/usr/bin/newgrp’
‘/usr/bin/write’
‘/usr/sbin/usernetctl’
‘/bin/traceroute’
‘/bin/mount’
‘/bin/umount’
‘/sbin/netreport’
)
linuxvar=`cat /etc/issue.net |head -n1`
linuxvar=${linuxvar#*release}
linuxvar=${linuxvar:1:1}
version=1.2

safe_deluser(){
echo “delete user …”
for i in $V_DELUSER ;do
echo “deleting $i”;
userdel $i ;
done
}

safe_delgroup(){
echo “delete group …”
for i in $V_DELGROUP ;do
echo “deleting $i”;
groupdel $i;
done
}

safe_password(){
echo “change password limit …”
echo “/etc/login.defs”
echo “PASS_MIN_LEN $V_PASSMINLEN”
sed -i “/^PASS_MIN_LEN/s/5/$V_PASSMINLEN/” /etc/login.defs
}

safe_history(){
echo “change history limit …”
echo “/etc/profile”
echo “HISTSIZE $V_HISTSIZE”
sed -i “/^HISTSIZE/s/1000/$V_HISTSIZE/” /etc/profile
}

safe_logintimeout(){
echo “change login timeout …”
echo “/etc/profile”
echo “TMOUT=$V_TMOUT”
sed -i “/^HISTSIZE/a\TMOUT=$V_TMOUT” /etc/profile
}

safe_bashhistory(){
echo “denied bashhistory …”
echo “/etc/skel/.bash_logout”
echo ‘rm -f $HOME/.bash_history’
if egrep “bash_history” /etc/skel/.bash_logout > /dev/null
then
echo ‘warning:existed’
else
echo ‘rm -f $HOME/.bash_history’ >> /etc/skel/.bash_logout
fi

}
safe_addgroup(){
echo “groupadd $V_GROUPNAME …”
groupadd $V_GROUPNAME
}

safe_sugroup(){
echo “permit $V_GROUPNAME use su …”
echo “/etc/pam.d/su”
echo “auth sufficient pam_rootok.so debug”
echo “auth required pam_wheel.so group=$V_GROUPNAME”
echo “gpasswd -a $WORKUSER $V_GROUPNAME”
if egrep “auth required pam_wheel.so” /etc/pam.d/su > /dev/null
then
echo ‘warning:existed’
else
sed -i “/^#%PAM/a\auth required pam_wheel.so group=${V_GROUPNAME}” /etc/pam.d/su
sed -i “/^#%PAM/a\auth sufficient pam_rootok.so debug” /etc/pam.d/su
gpasswd -a $WORKUSER $V_GROUPNAME
fi
}

safe_sudoer(){
echo “permit $WORKUSER use sudo …”
echo “/etc/sudoers”
echo “$WORKUSER ALL=(ALL) ALL”
if [ -n $WORKUSER ]
then
if egrep “$WORKUSER” /etc/sudoers > /dev/null
then
echo “warning:existed! ”
else
echo “$WORKUSER ALL=(ALL) ALL” >> /etc/sudoers
echo ‘export PATH=$PATH:/sbin:/usr/sbin’ >> /etc/bashrc
echo ‘export LDFLAGS=”-L/usr/local/lib -Wl,-rpath,/usr/local/lib”‘ >> /etc/bashrc
echo ‘export LD_LIBRARY_PATH=”/usr/local/lib”‘ >> /etc/bashrc
fi
else
echo “warning:skip! ”
fi
}

safe_denyrootssh(){
echo “denied root login …”
echo “/etc/ssh/sshd_config”
echo “PermitRootLogin no”
sed -i ‘/^#PermitRootLogin/s/#PermitRootLogin yes/PermitRootLogin no/’ /etc/ssh/sshd_config
}

safe_changesshport(){
echo “change ssh port …”
echo “/etc/ssh/sshd_config”
echo “Port $SSHPORT”
if egrep “Port $SSHPORT” /etc/ssh/sshd_config > /dev/null
then
echo “warning:existed! ”
else
echo “Port $SSHPORT” >> “/etc/ssh/sshd_config”
fi
}

safe_stopservice(){
echo “stop services …”
for i in $V_SERVICE ;do
service $i stop;
done
}

safe_closeservice(){
echo “close services autostart …”
for i in $V_SERVICE ;do
chkconfig $i off;
done
}

safe_closeservicewhite(){
echo “close services autostart …”
for i in `ls /etc/rc3.d/S*`
do
CURSRV=`echo $i|cut -c 15-`
echo $CURSRV
case $CURSRV in
crond | irqbalance | microcode_ctl | network | sshd | syslog | rsyslog | snmpd | fail2ban | ntpd | lvm2-monitor | iptables | auditd | kdump | sysstat | memcached | smartd | nagios | local | sphinx )
;;
*)
echo “change $CURSRV to off”
chkconfig –level 235 $CURSRV off
service $CURSRV stop
;;
esac
done
}

safe_tty(){
echo “close tty …”
if [ ${linuxvar} == 6 ]; then
echo “/etc/init/start-ttys.conf”
echo “/etc/sysconfig/init”
echo “ACTIVE_CONSOLES=/dev/tty[${V_TTY6}]”
echo “init q”
#close tty
#initctl stop tty TTY=/dev/tty6
sed -i “/^env ACTIVE_CONSOLES/s/\[1-6\]/\[${V_TTY6}\]/” /etc/init/start-ttys.conf
sed -i “/^ACTIVE_CONSOLES/s/\[1-6\]/\[1-2\]/” /etc/sysconfig/init

else
echo “/etc/inittab”
echo “#3:2345:respawn:/sbin/mingetty tty3”
echo “#4:2345:respawn:/sbin/mingetty tty4”
echo “#5:2345:respawn:/sbin/mingetty tty5”
echo “#6:2345:respawn:/sbin/mingetty tty6”
sed -i “/^[${V_TTY}]:2345/s/^/#/” /etc/inittab
echo “init q”
fi
init q
}

safe_ctrlaltdel(){
echo “close ctrl+alt+del to restart server …”
if [ ${linuxvar} == 6 ]; then
echo “/etc/init/control-alt-delete.conf”
echo ‘#exec /sbin/shutdown -r now “Control-Alt-Delete pressed”‘
echo “init q”
sed -i ‘/^exec/s/^/#/’ /etc/init/control-alt-delete.conf
else
echo “/etc/inittab”
echo “#ca::ctrlaltdel:/sbin/shutdown -t3 -r now”
echo “init q”
sed -i ‘/^ca::/s/^/#/’ /etc/inittab
fi
init q
}

safe_ipv6(){
echo “close ipv6 …”
if [ ${linuxvar} == 6 ]; then
echo ‘”alias net-pf-10 off” >> /etc/modprobe.d/ipv6.conf’
echo ‘”options ipv6 disable=1″ >> /etc/modprobe.d/ipv6.conf’

cat > /etc/modprobe.d/ipv6.conf << EOF alias net-pf-10 off options ipv6 disable=1 EOF else echo '"alias net-pf-10 off" >> /etc/modprobe.conf’
echo ‘”alias ipv6 off” >> /etc/modprobe.conf’
if egrep “alias net-pf-10 off” /etc/modprobe.conf > /dev/null
then
echo “warning:existed! ”
else
echo “alias net-pf-10 off” >> /etc/modprobe.conf
echo “alias ipv6 off” >> /etc/modprobe.conf
fi

fi
echo ‘/sbin/chkconfig ip6tables off’
echo ‘”NETWORKING_IPV6=no” >> /etc/sysconfig/network’
/sbin/chkconfig –level 35 ip6tables off
if egrep “NETWORKING_IPV6=no” /etc/sysconfig/network > /dev/null
then
echo “warning:existed! ”
else
echo “NETWORKING_IPV6=no” >> /etc/sysconfig/network
fi
}

safe_selinux(){
echo “disable selinux …”
echo “sed -i ‘/SELINUX/s/enforcing/disabled/’ /etc/selinux/config ”
sed -i ‘/SELINUX/s/enforcing/disabled/’ /etc/selinux/config
echo “selinux is disabled,you must reboot!”
}

safe_vim(){
echo “edit vim …”
echo “alias vi=’vim'”
sed -i “8 s/^/alias vi=’vim’/” /root/.bashrc
cat >/root/.vimrc<”
echo “”
echo ” deluser delete user”
echo ” delgroup delete group”
echo ” password change password limit”
echo ” history change history limit”
echo ” logintimeout change login timeout”
echo ” bashhistory denied bashhistory”
echo ” addgroup groupadd $V_GROUPNAME”
echo ” sugroup permit $V_GROUPNAME use su”
echo ” denyrootssh denied root login”
echo ” stopservice stop services use black list”
echo ” closeservice close services use black list”
echo ” closeservicewhite close & stop services use white list”
echo ” tty close tty”
echo ” ctrlaltdel close ctrl+alt+del”
echo ” ipv6 close ipv6″
echo ” selinux disabled selinux”
echo ” vim edit vim”
echo ” lockfile lock user&services”
echo ” unlockfile unlock user&services”
echo ” chmodinit init script only for root”
echo ” chmodcommand remove SUID”
echo ” version ”
echo “”

;;
esac

设置权限

chmod u+x ./autosafe.sh

运行脚本

./autosafe.sh deluser
./autosafe.sh delgroup
…..

猛击下载脚本
autosafe1.2.sh

其它参考
linux基本安全配置手册
iptables 默认安全规则脚本